Started once again ....

With some spare time in the holidays, I have resumed the build .... 


First thing i did was make some room for the buttons in my flawed CP layout, now there is some room for the buttons to sit. I also need to router the CP top from behind to give it enough throw distance. 

I then cut fixed two battens to the sides of the inner monitor panel, and a large sheet of MDF across them. 

I then measured the size of the TV screen I am going to use and used that as a template to mark the centre. 

I cut the hole I marked out with a jigsaw and planed it to get any bumps out. I then fixed it to the battens

Next step is going to fix the flexible ply to around the bends