Design Choices ....

So I have been drafting in SketchUp, this is what I have so far ...... 


Still need to do the bevels and the buttons on the side of the CP. 

Comments

Post a Comment

Popular posts from this blog

Progress ....

Image
Marked out the side panels after getting some more MDF.  Rough Plans  Cut out, Slight backward tilt, and used a flush bit on the router to make a duplicate.  Made a bloody mess!! MDF dust gets everywhere! Temporarily attached side panels to bottom cabinet.   Packing up at the end of the day is a bit of a pain because of a lack of a fixed workspace.  Fixed the CP bottom tray to the bottom cabinet Created a top section to mount the tv, and also bought some 3mm Plywood to bend around the front. 
Read more

Purchase Made:

Made the first purchase of the vewlix cabinet today from  https://in2amusements.com.au/   Purchase included pretty much a 1 player control setup:  PS360 PCB  Options:  USB Cable  Seimitsu PS-14-KN 30mm Clear Pushbuttons Single Wire with .110 Quick Connector  Options:  Wire Colour : Black Sanwa JLF-TP-8YT Joystick  Options:  Sanwa Ball Top : Black Sanwa JLF-H harness I opted for the 1 player control so i can wire it up on a smaller box test it out and see how the PCB goes while I wait for some more cash to buy the 40" tv.  Speaking of the 40". I dunno ......  i was sitting fairly close to my current 40" tv with SF4 going and the CP is going to have to come out quite a bit for the player to see the whole screen. i'll do some more testing before I make the final TV purchase, but the TV is going to have to be next to buy, because that will determine the size of the entire cabinet build.  I also opted for the Cl...
Read more
Image
Rebated the inner shelf sides for the plywood to fit nicely  More rebating .... Today started the CP box. Sorted the width of the digital photo frames This is how it will sit  CP box sitting on the main cabinet. (my custom MAME cabinet in the backgroung needing its new display to be installed) 
Read more